Land Rover Repair: EAS in Hard Fault, fuse box, time chris

Question
I was wondering if you could tell me what relay behind the battery I use to run the Compressor while in hard fault. I just want to pull the relay and jump it so that I can test the compressor and put some air in a reseated bag. I have done this before but have forgotten what one. Thank you for your time. Chris

Answer
In the main fuse box it is relay #20.

If you use the ECU connector under the drivers seat, put a small jumper between pins 1 and 8 to run the compressor.  This way will also test the relay.  you can jumper the other pins to inflate all the bags.

http://www.rover-renovations.com/PigtailProcedure.html