Land Rover Repair: Change of brakes, rear hubs, swivel pin

Question
Hi! The ABS lights on my dash with intermittance since I changed front rotors and pads. What is it usually disajusted with change? I didn't disassemble the swivel pin housing only the hub for changing rotors. What do I have to check and adjust?
Thanks a lot for information! Have anice holidays!
Ivan

Answer
If the light is on after changing pads the pads you fitted may be making an untrasonic sqeal when the brakes are applied.  I have seen that before.

You may also have left the hub bearings loose and that fouls up the signals.

Finally, the ABS sensors may be dislodged from the mounts (tap them in) or you may have damaged the reluctor rings on the rear hubs (you had to remove them to change rotors)