Land Rover Repair: DISCO II ABS Sensor, greenstuff pads, abs sensor

Question
I recently had EBC rotors and greenstuff pads installed by a reputable mechanic on my disco II. Immediately after the install was complete i began hearing a clicking noise as the wheel rotates when i'm driving. The faster i go the faster the clicking sound...also, my TC, HDC and ABS lights just came on and will not go away (after disconnecting my battery for 10 minutes).

Any ideas?

Answer
Hi Seth,

You'll have to examine the noisey wheel to determine where the noise is coming from.  Could be related to the 3 amigos (TC, HDC, ABS).

Remove the tire and examine the work performed.  Turn the rotor to see if you can duplicate/locate the noise.  Hopefully, all the bolts are good and tight on the wheel with the noise.  I've seen the caliper bolt come loose.  Some use locktite to prevent this from happening.

Best of luck,

JohnMc