QuestionMy 2000 Disco ABS, Hill Descent and Traction Control lights are on. Im pretty sure that I need new brakes but could this be causing these lights to be on? They have been squeaking for a while now. And also do you have any tips for replacing the brakes. I plan on doing it myself. Thanks for your time
AnswerHi Jonathan,
the ABS, HDC & TC lights (aka 3 amigos) seems to be a common problem with newer Disco II's. The cause ranges from faulty sensors to actual problems detected with suspension, brakes or the ecu that monitors them. In the UK a recall was supposedly performed. Here in the N.America, you'll have to rely upon LRNA to diagnose what could be causing those 3 lights to trigger at the same time.
As for you brakes, changing the pads is a simple procedure and all 4 can be done in a couple of hours. Make sure you replace the pins and springs along with the pads. You can get a kit from your local LR parts department. Most auto parts stores have aftermarket pads for your Disco. I prefer Raybestos pads.
Changing the rotors will take longer than just the pads. Do this in pairs, front rotors, back rotors or all 4 rotors at once. While you are replacing the rotors you can pack new grease into the bearing area and examine the half-axle for wear.
Do one side at a time. If you make a mistake in the order of re-installing the new rotors, you have the other side as an example to correct yourself.
Best of luck,
JohnMc
