QuestionI have a 1979 mgb. Idont know how to put the convertable top down.Please help me
AnswerHi Dominick
Do not fold the hood until it is dry, and
Make sure the rear window is zipped into place before you start.
Unclip sun visors and move them out of the way.
Release both toggle catches.
Release the 2 pop fasteners on the screen edges.
Release the 2 pop fasteners around the hood frame.
Release the 2 pop fasteners just behind the drop windows.
Tip both seats forward.
Release all the clips that fasten the hood behind the seats.
Fold the hood so that the folds correspond to hood material.
(Do not fold any of the 3 windows – they will crease permanently).
You may find it easier to half fold the frame to do this.
Fully fold the frame, and roll the hood after closing the toggle catches
so they don’t damage the hood material.
You should now be able to strap the hood to stop it flopping open.
Finally, cover everything with the half tonneau.
May I suggest that you purchase an MGB Driver’s Handbook?
They only cost a few dollars from Moss Motors.
