Mitsubishi Repair: tranny, genesis code, autozone

Question
I am getting a genesis code of  manufacturer trans. control.
I have replaced the valve body due to a TCC code.
I am still getting the first code coming up.Any ideas?

Answer
Tony: You got to reset your car's computer. You do not say what year this car is. If it is older than a 2000 model you can reset the computer by removing the neg.cable off the battery, wait 5 minutes and then put the cable back on that should fix it. Other wise you will have to go to someplace like an AutoZone and they will reset the computer for you. Till you do this, you will keep getting that code. Hope this helps and good luck!