Mitsubishi Repair: Mirage 1998 cant start from the first time, crank angle sensor, vacuum leak

Question
Thanx again,
I meant is My car when it come's hot mean engine is warm ready to run because when it's not warm enough it stop when i try to start driving. car smoke have no color, it's only some clean water.
the only problem that i have is the car now for 2 months not starting from the first time.
i hope you can advice me what is the reason since no practical reason for not working okay.
Thanx
Sam


Answer
Sam: You need to buy yourself a repair manual, can get one at any parts store for around $20.00. But this is what my repair manul has down on it's troubleshooting page for, engine will rotates but will not start..... battery cables loose or corroded., leaking fuel injector(s)., faulty fuel pump, pressure regulator and fuel not reaching the fuel rail., ignition components damp or damaged., worn, faulty or incorrectly gapped stark plugs., broken, loose or disconnected wiring in the starting circult., loose distributor or crank angle sensor is changing ignition coil or faulty coil. And again I said you might have a vacuum leak, which would be at the gasket between the intake manifold and throttle body or between the intake manifold and the engine. A vacuum leak would mean that air is getting into someplace that it shouldn't, or else some parts on the engine build up a pressure but if you have a vacuum leak, then that pressure can not build up as it should. So the engine does not run right. To find a vacuum leak is pretty hard, you have to let a shop find that. I would say that you should take your car to a shop and let them find your problem. I can only make guesses and hope that they lead the person in the way to find their problem. I do hope this helps and good luck!