Mitsubishi Repair: TIMING, dodge stealth rt, cam sprockets

Question
92 DODGE STEALTH RT 3.0 DOHC TWIN TURBO

I'M REPLACING THE TIMING BELT (IT STRIPED OUT) . HOWEVER, I CAN NOT SEEM TO LOCATE THE TIMING MARKS ..ANY CLUES TO WHERE THE THEY ARE?..AND WHERE  THEY ARE SUPPOSED TO BE SET AT...THANKS...

DAVID

Answer
David,
Unfortuntely, I don't have that exact knowledge of where the marks are but typically the marks are located on the crank sprocket, oil pump sprocket, and on the engine block.  There should also be markings on the cam sprockets that should line up to each other.

I would highly recommend having a good service manual to reference when performing a timing belt change.  the facorty shop manual is the best reference guide and you can order one from an dealership.  You may also be able to find a used one on eBay.  But if you want some online information, you can get that from others much more knowledgable of the 3000GT than myself.  You can find it here:
http://www.3si.org/

The folks on that site should be able to give you all the information about your car.
Good luck!