Motorcycle Repair: 65 honda 305 dream, honda 305 dream, punch marks

Question
How do i realign kick starter after i've replaced clutch cable?, can't seem to get kick to spring back , can you walk me through please?

Answer
Hi Emilio,

Remove the cable cover again and turn the kickstart
shaft clockwise until it stops.

Move the kickstart arm to the 10:00 o'clock position and reinstall the cover.
The arm should be at 11:00 now.
If not remove the cover, move the arm then reinstall
until you have it at the 11:00 position.

The shaft has to be rotated fully clockwise
to it's stop before putting the cover on.

The lever and the shaft may have punch marks
on them to line them up also but if you do as
above it should come out right.
Hope this helps the problem, it is a bit
hard to explain.

Good luck,
Wayne S.
---------------------------------------