Motorcycle Repair: Dual Foot Brake, stock master, foot brake

Question
I have a 1987 Sportster that was outfitted with a dual foot brake, 60/40 split between front and rear, single disc on each wheel.  What is entailed in switching it back to a separate front, hand brake?

Thank-you

Answer
I have never seen this setup before so I am going to assumn that there are two lines coming off the master cylinder. You will have to get the stock master cylinder and the stock brake line for the rear as well as the front brake. After you get that just hook it up and bleed the system and you should be good to go.
Good luck and happy riding
Mike