Motorcycle Repair: brakes, rear brakes, bleeder

Question
what is the best way to bleed the rear brakes on a 2006 Sportster
took off caliper wiped it down replaced pads and now I can not get any pressure on pedal in order to bleed any help you can give will be greatly appreciated
thanks

Answer
Go to the bleeder and pump the brakes a few times. With the lever pushed down, crack the bleeder and then close it and pump the brakes. Keep do this until the brakes pump up. Keep an eye on the master cylinder and dont let it go dry or you will get air in the lines
Good luck and happy riding
Mike