Motorcycle Repair: 1974 cb360 twin, crank case, clutch plates

Question
Hello,
I have 1974 cb360 twin, and need to replace the clutch.  The repair manual does not give detailed instructions for replacement.  All the manual says is remove gears and replace clutch.  Can you give me some detailed instructions on how to replace the clutch?
Thanks,
Chris

Answer
Chris, how much detail do you think you need.  You have to remove the kick stater, the foot peg, and the right crank case cover. YOu have to remove the four bolts holding the pressure plate on the cover and then you can slide out the clutch plates.  Be sure and pay attention to where the plates go so you put the new ones in with the same pattern of friction disks and metal plates.   

You will reassemble the parts in the reverse order.

Regards
Rich