Motorcycle Repair: frt motor mount, harley dealer, stablizer

Question
QUESTION: i have a 99 electra glide classic and need to replace the frt motor mount. is it hard to change and what would i have to do to change it

ANSWER: You would have to put a lift under the motor and take the pressure off the motor. Then remove the bolts that hold the mount on and jack the motor up a little and remove it. Then just install the new one
Good luck and happy riding
Mike

---------- FOLLOW-UP ----------

QUESTION: changing that wasn't to hard but i still have the same vibration as i had before and maybe a little more. what is the next thing i can try to stop the vibration?

ANSWER: Does the vibration happen throughout the entire RPM range? Ride the bike down the road and get it to vibrate. Shut the bike off and coast, do it stil vibrate?
Mike

---------- FOLLOW-UP ----------

QUESTION: i didnt get a chance to take the bike out but it vibrates as much when it is sitting still as when i ride-called the harley dealer and he said it might be the stablizer? i think thats the word he used

Answer
the stablizer is located at the top of the center of the motor. it is a bar going from the frame to the center motor mount. If you have never messed with it or it is not broken, then there shouldnt be anything wrong with it
Good luck and happy riding
Mike