Motorcycle Repair: white milky oil coming down thru my oil level when running the bike ., head gasket, milky color

Question
QUESTION: I changed the spark plugs by my self for my motorcycle and i beleive i did a good job of keep everything clean and fit . but i tried to rid my bike and i noticed there is some milky or white liquid thru my oil level indicated .i used amsoil sythetic , so i drained the oil and i am now in the process of a brand new oil change , is this normal or there is something that is getting mixed up with the oil ?

ANSWER: A milky color usually means there is water in the oil. I would keep an eye on it.
Good luck and happy riding
Mike

---------- FOLLOW-UP ----------

QUESTION: how would I check if it is getting mixed with water ? Could this be a bad head gasket ? How would i really find out . i don;'t want to wait long untill it's too late and something bad happens to the engine . I was told by the dealer when i called them that this could happen when you use synthetic oil and the bike was parked for a while . is it true ?

Answer
All motors draw some moisture when you park them. As the motor cools down it draws air. After you start it the heat from the motor drives the moisture off.
Since you have changed the oil, like I said before, keep an eye on it. If you had a bad head gasket you would hear it hiss, so its probably not that. As to where the oil came from, I am not sure.
Good luck and happy riding
Mike