Motorcycle Repair: 1994 fzr 1000 axcell/stall problem, fzr 1000, jet kit

Question
my fzr has a vance and hine slip on, stage to jet kit,k&n filter, new plugs, oil change,cleaned the k&n, took it to the shop and got the floats reset because of vaper lock problems,it has about 30,000 miles some times when i take off it will bog and die. it is hard to start after. when it starts it idles really low ,and is more than willing to do it again.i am a new ridder and hope that i am stupid with the throttle,and flode it there is no lack of power on the top end.hope i am stupid and need to learn to ride. thanks for any healp

Answer
Mark,
Is the compression equal on all cylinders?
Should be around 150 psi or higher.

Have you checked the fuel tap for flow
and the fuel filter. Can you read the
spark plugs, black=rich fuel, very light
color is too lean, a light tan color is good.

It may need some carb adjusting or synching
depending on the plug reading.
Was the vapor locked fixed? Was it
plugged tank vent or misrouted fuel lines?