Motorcycle Repair: head bolt torque?, bolt torque, head bolt

Question
I'm redoing the head gaskets on an 86 Wide Glide, and I need to know the head bolt torque. Any info would be greatly appreciated. thank you

Answer
You have to start with a certain bolt and then go from there. On the front head start with the bolt on the left front and go in a semi-circular pattern. On the rear start with the left rear bolt and go in a circular pattern.
Tighten each bolt, going in the pattern I stated before, 7 ft-lbs. Then 12-14 ft-lbs. Then mark each bolt and turn 1/4 of a turn or 90 degrees.
Good luck and happy riding
Mike