Motorcycle Repair: Clutch inop, ape hangers, clutch cable

Question
Yes I adjusted the cable but it still doesn't work
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
I have a 2006 Dyna street bob, I changed the clutch cable on it using a longer than stock cable because I put 16 inch ape hangers on it. and now my clutch will not disengage, I removed the derby cover and can see the clutch moving when I pull the lever, but other than that nothing is happening. I tried adjusting the clutch but that did not fix the problem. how do I correct this problem?
-----Answer-----
Did you adjust he cable after you installed it?
Mike

Answer
remove the derby cover and check the adjustment on the clutch itself. make sure you have slack in the cable when you do this. Now adjust he cable. If it still doenst work then you are going to have to remove the right cover and make sure you have it installed right.
Happy New Year
Mike