Questionhi i have a 1996 cr125 and im changing head gasket and i need to know with
a torque wrench how much to tighten it.
AnswerHi Yanic,
I cannot locate the torque values in my resources. I don't have the service manual, either.
Respectfully,
Mark Shively
Fastener Type Size Torque/Eng. Torque/Metric
screw, pan 5mm 0.35~0.5kg-m 2.5~3.6lbs-ft
screw, pan 6mm 0.7~1.1kg-m 5.1~8.0lbs-ft
bolt, nut hex 5mm 0.45~0.6kg-m 3.2~4.4lbs-ft
bolt, nut hex 6mm 0.8~1.2kg-m 5.8~8.7lbs-ft
bolt, nut hex 8mm 1.8~2.5kg-m 10.1~18.1lbs-ft
bolt, nut hex 10mm 3.0~4.0kg-m 21.7~28.9lbs-ft
bolt, nut hex 12mm 5.0~6.0kg-m 36.2~43.4lbs-ft
bolt, flange 6mm 1.0~1.4kg-m 7.2~10.1lbs-ft
bolt, flange 8mm 2.4~3.0kg-m 17.2~21.7lbs-ft
bolt, flange 10mm 3.0~4.0kg-m 21.7~28.9lbs-ft