Motorcycle Repair: Clutch, sportster 883, clutch plates

Question
I probably have an easy question.  My clutch plates were recently replaced on a 2004 Sportster 883.  First the clutch seemed a little tighter than usual, but now it never totally disengages.  I was wondering how you go about adjusting the clutch so I can loosen it a bit.

Thanks

Answer
Check you clutch lever. You should have about 1/8 inch play in it. If not then on the cable there is an adjuster. Loosen the locknut and turn the adjuster on the cable until you have the correct play. Tighten the locknut and your set to go
Merry Christmas
Mike