Motorcycle Repair: arctic cat snowmobile, arctic cat zrt, arctic cat zrt 600

Question
ok, i found where the wires go to and there is continuity through all the wires, someone told me that its possible for a CDI box to do really funny things. do you think that could be a possibility
thanks
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
Maby i am asking the wrong type of question in this forum but i'm kinda stumped.  i have a 1996 arctic cat ZRT 600 snowmobile. my lights flicker, my dash lights go out and my speedo and tach go in reverse when the kill switch is in the run position, if its in the off position everything seems to work fine. i tested my kill switch and teather and everything works but it doesnt kill the engine.  these sleds have a throttle safty system that is built into the throttle and kill switch assembly on the handelbar, when i unplug the whole unit everything seems to work fine. ive checked all the grounds and whatever else i could think of and still have nothing.  im one step from pulling my hair out, lol. any info would be great.
thanks
-----Answer-----
i would trace the continuity from the switch and follow the other end of the wire where it end's to chk continuity.then from ther turn switch on check wire from end to end for voltage flow ok. if you need more help im here ok.

mitch

Answer
jason,
that is correct. rectifires and cdi's are bad for wrking good then not and in and out. more than likely thats tour problem with it take it off and take it to a local dealer they can chk it for you to be sure.if you need more help let me know ok.

mitch