Motorcycle Repair: 72 Yamaha AT2, starter solenoid, fuse box

Question
Bike was running fine and just quit, found the plug not firing. The bike is electric start with an alternate kick start. I attempted to find a fault in the ignition system with no luck and have replaced the plug wire and cap assembly along with new plugs. The ignition switch is fine and the bike is not equipped with a neutral switch, stand switch, ect.. I checked the points and they seem to be okay. I went through the wiring harness and all the connections look good. What do I do next and what is the best way to test ignition coils and started switch solenoids? Thanks

Answer
go to the main fuse box chk yur main fuse also turn key on go to the starter solenoid with a screw driver touch both connections on the solenoid if the bike turn over yur switch ids ok ,also with switch on take screwdriver touch the points if you get fire then your coils is bad ok

mitch