Motorcycle Repair: 1996 honda cbr600f3 midrange sputter, 1996 honda cbr600f3, flat tip

Question
Hello Mitch,
I have a midrange sputter on the cbr after cleaning the carbs well enough to
start great and overall run good except for the midrange where it stumble
bad. Noticed the low jets and high jets are removable w/ a flat tip but the
other tube in on the bottom it just smooth. I'm not sure if that comes out or if
its the midrange jet or not. Any info will be greatly appreciated.
Thanks
Bret

Answer
the one at the bottom should come out. also iwould chk. thetiming too. and the height of the needle vavles too this could cause midrange sputter. try rhis then contact me again i will do more research on this for you hang in ther we will get you going guarantee you ok.
 

                      mitch kruszynsky