Motorcycle Repair: Didnt answer it., chain oiler, banjo fittings

Question
-------------------------
  I mentioned that I have a MAGNETO: no battery. ('67 Sportster, kick start only)The oil tank I have is pressed together in two halves. The outside separation is the center flange for mounting with four holes. I was refering to the holes to the interior of the tank: the largest on the left top is obviouslly the filler. To the right on the corner is a small diameter threaded hole; maybe the vent? Down the right side are the three larger threaded holes, two on one side of the separation flange and one on the other side. These are the mounts for the Banjo fittings, I'm pretty sure. I'm just not sure which of the three hoses from the engine go to which of the three banjo holes on the tank.
   Is one of the hoses from the crank case a vent hose that feeds to the oil tank? Is the small threaded hole on the tank, at the top, a breather?

Answer
Sorry about that. I guess I should have read your question better.
the 4 holes you are refering to are 1, bottom one is the feed line. The small one is the chain oiler.2rd one up is the return and the highest one is the crankcase vent.
hope this helps
Mike