Motorcycle Repair: alignment, axle nut, flsts

Question
2002 flsts,Mike do you have any tips or tricks for getting the bike into alignment,have had an issue with the bike pulling to the right,just replaced tires and want to get right.Thanks for your time...Fred

Answer
NO problem. Locate the belt adjusters and loosen the locknut. Now loosen the axle nut. You should have the bike off the rear wheel. Go to the belt side and adjust the belt to specs. Now take a measurement of the adjuster to the point where it screws in. Go to the other side and use the same measurement. Your wheel should be in alignment. Recheck the belt adjustment. Tighten the locknuts and the axle nut and you should be good to go.
Good luck and happy riding
Mike