Motorcycle Repair: 1997 kawasaki KLR250 clutch cable installation, kawasaki klr250, clutch lever

Question
where do i start?
i don't have the manual...
but i have the clutch cable
                         Thank you

Answer
Hi Anthony,

Sorry for the long delay in responding. My PC has been down for several days.

Take a look at the current cable and remember how it is routed.

Put maximum slack in the cable via the cable adjusters.

Remove the cable from the clutch lever assy. Same at the opposite end, and pul it from the frame.

Installation is reverse, with the exception of adjusting the free play out of the cable. Set the clutch lever adjuster screw at about 5mm out from lever assy. and adjust slack out of cable at opposite end adjuster. Lock all locknuts.

Respectfully,
Mark Shively