Nissan Repair: 1994 altima se fuel problem, wiring connections, eng comp

Question
QUESTION: will start if i put fuel in the intake. have fuel pressure in the rail. car was running fine was parked for 3 months then the problem.have checked all wiring connections . no codes

ANSWER: Hi Russ -

Have you checked the pulses for the injectors? If there is no codes, I would suspect there is a problem with the distributor module, which gives the signal to the injectors.

Hope this helps -
aloha
calvin

---------- FOLLOW-UP ----------

QUESTION: Thanks for your quick reply .yes there is a pulse .I just found that there is no power to the injectors ( white wire ) the fuse is good left front of eng comp .is there a problem to run a new wire from the fuse to the injectors . or do you know if there is a connection in this circuit other then at the rail

Answer
Hi Russ -

If there is no power to the injectors, then it could be a couple things:

The module in the distributor (as I mentioned). The power signal to the injectors comes from that module.

Could be the ECM has failed. Can you tell me when you turn the ignition on, does the Check Engine light stay on for a few seconds and shut off, or does it remain on?

Let me know
aloha
calvin