Nissan Repair: 93 Nissan, clutch adjustment, clutch master

Question
QUESTION: The truck is now running thanks to your help.I did everything you suggested now,one of the cylinders are not firing but getting a spark through plug and wire....could it be the fuel injector????? I also used the SEA FOAM....what should I do now?????

ANSWER: Keith,

If you have spark and compression then the injector is the answer.  You could get a set from a wrecking yard and perform an ohm check and use one that is closest to yours to save some money.  Or just purchase one from the store.  You will need new injector o-ring seals and engine oil to lubricate them when you reinstall the injector rail.

---------- FOLLOW-UP ----------

QUESTION: Thanks for all of your help the truck is firing and running perfect in that aspect but now I am having other problems.The wheels are hopping in reverse and hard to shift in other gears.Is there a clutch adjustment or what would you think the problem is???

Answer
Keith,

Sounds like the clutch master or slave cylinder is in need of replacement.  When you do the bleeding use Ford High Performance Brake Fluid.  Any Ford Dealership will sell this fluid and you have to ask for it by name.  Black label and not the blue label to get the good stuff.  It gives you a firmer pedal feel.