Nissan Repair: 1990 nissan 300z non turbo wont rev, nissan 300z, vacuum leak
Questionit starts ok, lopes when it's idling. not bad but a little but won't rev past 2000 rpm. fuel filter ok,
AnswerBrandon,
If there is no code then it is a matter of tuning the engine with the replacement of sparkplugs. Then, check the fuel pressure to make sure you have sufficient pressure to feed the engine. Next, check all vacuum lines, one at a time, to keep from mixing one up with another. Basically, what you are looking for is a vacuum leak. Next, check the distributor for the presense of oil on the optical shutter wheel. If there is oil then the car does not get a strong crank angle signal and it will not fire the plugs properly. This is especially true at higher RPMs.
- Nissan Repair: 96 Nissan Maxima GLE, oxygen sensors, nissan maxima
- Nissan Repair: Automatic Transmission, 2000 Nissan Maxima,GLE,57000Mi, bought new., nissan maxima gle, nissan maxima
- Nissan Repair: power door locks, nissan frontier, master switch