Nissan Repair: 92 maxima high beam wont go on, turn signal switch, high beams

Question
my 92 maxima's high beam will not go on, I have changed the bulbs and breaker, but still go. what do I have to do to correct this? please help.

Answer
Hi Brian -

there are 2 things you can check. First, get a volt meter or 12v test lamp and turn the high beams on. Check voltage at the wires going into the lamps. there should be voltage on 2 of the 3 wires.
Since you replaced the lamps, then I am assuming there is voltage.

If you do not have voltage at the wires, then your turn signal switch is probably defective.

When you say you replaced the breaker, is that the fuse ot relay?

Hope this helps -
aloha
calvin