Nissan Repair: 1999 nissan quest, nissan quest, control arm

Question
how do you replace front wheel bearrings on 1999 nissan quest do you have any instructions  

Answer
Karen,

The spindles need to be removed and taken to a shop with a press to have the old ones pressed out and the new ones installed.  You have to remove the tires, brakes, struts, axle, tie rod end, lower control arm and the ABS connector and then you have to take the other side down too.  The van will have to be aligned after you put the spindles back on.  Look for a hundred dollars a side to have the bearings replaced.