Nissan Repair: s14, nissan 200sx s14, nissan 200sx

Question
hi, i have recently bought a stolen recovered nissan 200sx s14 and i have replaced the ignition barrel, the car is not starting due to the immoblizer, is there a way of bypassing it?
the system on my vehicle is that of the early s14 not the nats 2 system thats usually found on the s14a.( black keyfob model )

Answer
Peter,

You mean the car turns over but does not start.  The BCM is not allowing the fuel pump relay to be grounded.  So, you could bypass the circuit and hook the relay to ground and change the powered side of the relay to 15 amp switched and it should run.  Check this by grounding the fuel pump relay and see if the pump works.  If it does you are in business and the car should start.  Email me back if you need more...