Nissan Repair: 97 nissan pathfinder signal and hazard lights, nissan pathfinder, fuse block

Question
Howdy! My 97 pathfinder was working beautiful. I shut it off, then I started it a half hour later. When I went to signal they didn't work. I pressed the hazzard button and the flashers didn't work either. What is weird is that the signal lights flash when I press lock on the keyless entry, so I know that the bulbs flash and all work. How do I fix the signal and hazzard lights? Do I just put in new flashers(2)in under the dash? Thank you very much.  

Answer
Hi Ryan,

I found this info,

TURN SIGNAL OPERATION
With the hazard switch in the OFF position and the ignition switch in the ON or START position, power is supplied through 7.5 A fuse [No.[11], located in the fuse block.

This is where I would start. The alarm works on a seperate fuse.

Try this and let me know if this fixed it.

Follow up: Hi Ryan, try to resubmit when we need more info please, I almost didn't see the fuse was ok. It's the software AE uses. I am sorry, Ryan! I thought you wrote you replaced the flasher! Yes, please replace the flasher and use your turn signals when changing lanes! ;)