Nissan Repair: Nissan cold valve adjustment/specs, pulsar nx, valve clearance

Question
Am rebuilding 1984 Sentra and need the cold valve clearance,intake and exhaust,1600 engine  

Answer
David,
On the intake 0.0008 or 0.0020 (it's in between these 2)

this is for the stem to guide clearance.  (for the intake)

The Exhaust 0.0018 to 0.0030  stem to guide clearance.

Stem to DIAMETER:
intake:
0.2744 - 0.2750
Exhaust:
0.2734 - 0.2740
This is the only specs I could find for the valves, this is from my Chilton book # 52700
For Sentra/Pulsar/NX 1982-1996 Repair manual
Page # was section 3 page 3
Good luck hope it helps
Darrel