Oldsmobile/Buick Repair: 2001 alero, trac, abs, & service light, olds alero, wheel bearing

Question
I have a 2001 Olds Alero 6cyl. The Trac,abs,and service engine lights are on. The front drivers wheel bearing has been done 5 times and the passenger wheel bearing has been done 3 times.  I used my scanner to see what codes it would read but it is not giving me any codes.  Could it be one of the back bearings?  Also if I pull the fuses for the anti lock (1 mini and 1 of the bigger ones) under the hood of the car I can get the service engine light and trac light to go out but obviously the abs and brake light stay on. No matter which fuse I put back in first the service light and trac light stay off but the minute I put the 2nd fuse in all the lights come back on. I hope this is enough info for you to help me out.  Thank you

Answer
Hi
The TRAC and MAYBE the ABS lights are on, IN PART due the the Service ENGINE soon light being on.
This vehicle TRACTION system uses engine data for low traction situations.
If there is ANY codes stored in the PCM (Engine computer) then the TRAC light WILL illuminate and if the TRAC light is on, the ABS light also will illuminate.
I would get the ENGINE codes out and diagnosed, and see if the trac and abs light go out at this time.
It's not the Service Vehicle soon light is it?
If it is, it MAY be a DRL bulb.
I would take it somewheres and have the engine scanned again.
I Hope this helps.
Good luck
Pawl