Oldsmobile/Buick Repair: Hub Assembly Removal, 1997 oldsmobile aurora, oldsmobile aurora

Question
I have a 1997 Oldsmobile Aurora were i'm trying to remove the driver side front hub assembly for replacement i've taken the axle nut off i've removed the brake caliper and removed the three bolts in the rear of the hub assembly itself still the hub assembly want come off i've taped from behind with a hammer used a blow torch to try and loosen it up a little I used a three jaw puller it didn't even work what do I do to get this hub off??????

Answer
Hi
There is a special tool listed in the procedure for this repair...although I have never had to use it.
The tool is called a "Front Hub Spindle Remover".
I have had most sucess using GM Rust Penetrant and Heat Valve Lubricant to soften up the rust. I know in other parts of country where there is snow/salt on roads and seaside, this is more of a problem. I have only ran into it a few times.I would see if this tool is avalible from a parts store offering loaner service.
If not get some GOOD rust penetrant, and really soak it good.
Hope this helps.
Good Luck
PAwl