Oldsmobile/Buick Repair: stalling and not restarting 1996 buick LaSabre, 1996 buick lasabre, crank sensor

Question
Mr Eliassen,
my buick will quit usually while turning and then it will not restart. We have had a crank sensor and ignition module replaced and it is still doing it.The biggerst problem is that isn't runnig a code. It has been suggested replacing the computer in it. The car only has 48,000. miles.  got it as part of estate settlement. There were only about 750 miles put on it in 4 yrs, could this be part of the issues with it. I would be thankful for any help you could suggest. I'm at my wits end, I,m afraid to drive it as I'm afraid I'll either get into an accident or cause an accident
thank you
Effie

Answer
Hi,Effie

When it stalls and on turns,How much fuel is usually in the tank?
 There has been a bulliten issued for you complaint,and it refers to the fuel pump and wiring in the tank,the connections at the fuel pump in the tank have been known to come loose or fail also the connectors are showing signs of burn through causing a fuel pump to stop running,have that checked out.

ED