Question-------------------------
OK, I got the ECM reader and the light blinkd fast 3 X then 2X...?
Im guessing this is #32 code...in my book says somehting about EGR?
what should I BUY to replace it to make it work?
Thanks!
looking forward to here from you....
:)
1987 Buick the reader slot was below the ASHTRAY on my LaSebre Limited Edition?
There is a solinoid and a valve? replace bothe to be safe?
Followup To
Question -
I have recently replaced the OXYGEN SENSOR, , and added more freon and my service engine soon light comes on occasionally?
1987 v-6 fi 3.8L Buicl LaSabre Limited Edition
Car run fine but this light is trying to tell me something? Oh I changed the oil filter, air filter, and oil, all flids are full, ...I put some fuel injector cleaner in the tank thinking it might(this is what I suspect but want your opinion)clean dirty fuel injectors but what do I do, is it safe to take a 400 mile trip?
Should I be concerned?
\is it the catlytic converter?
should I buy the code-tool for $30 bucks and try to solve it myself?
I have the book and read evrywhere with this challenge to make my "SRVICE ENG SOON" light go off? it doesnt stay on all the time eiother comes on for about 5 minutes then stays off for a day or so,....?
Help please?
Answer -
You need to get the code FIRST.
autohelp
AnswerYou may not have any voltage source to the EGR system and or any reference pulses from the ECM (computer) to the EGR system. You need to test the EGR system to be sure that you are getting a voltgae supply and a reference voltgae from the ECM FIRST. If you want to GUESS, you can go ahead and replace the solenoid and EGR valve but it's a 50/50 gamble.
