Oldsmobile/Buick Repair: ignition, no screws, wheel nut

Question
i really need to know how to remove the ignition on a 1988 olds . there are no screws or anything to take the colum off so i need to know how to do it plz ...oh yeah it has tilt too...

Answer
hey chris.well hear you go.remove the horn pad two screws in back of the steering wheel or just pops off #2remove the steering wheel nut.#3 remove wheel grab both sides and jerk back and forth if won,t come off get a suitable puller.#4there is a lock plate right there.there is a round lock holding it ic .to remove this you need a lock plate remover the plate has to be pressed down.to release tension on lock ring.after  you get lock plate off#5 take screws out of turnsignal switch.remove signal lever.pull up on round switch.you can now see a single torx bolt remove this ignition comes out .please take a min to rate my help ty billymac