Pontiac Repair: 2002 Pontiac Grand Am 2.2 SE

Question
Why does it not get fire to the sparkplugs?
It cranks but no spark.

Answer
Hi Joe:

You have no spark on any of the cylinders or just on 2? If you have no spark on all 4 it's either a bad Ignition module or crank shaft position sensor. If you have it on just 2 chances are it's a bad coil assembly. all 4 coils are part of the same cassette and the ignition module plugs into the top of the coil. If you try a module make sure you swap out the little jumper connector under the module. if you don't the module will not make contact with the coil and you will still not have any spark. good luck :-)