Pontiac Repair: engine pull, pullys, bell housing

Question
I have a 94 bonneville that blew an engine. I am trying to pull it but it dose not want to come out. I unbolted the engine mount on the front left side (by the pullys) also on the tranny toward the front. The bolts on the tourqe converter wires and exhaust. Is there another moter mount I am missing or how many bell housing bolts are there. I have got 6 out. I think there must be another mount somewhere. but I can not find it. Please advise.

Answer
Hi Robert:

Yes I think there are 6 bolts 5 that go in from the drivers side towards the passenger side and one that goes from the passengers side to the driver side it's on the back side of the engine between the engine and tranmission. The mount on the frame on the pasenger side and the last thing is the bracket that goes onto the engine block between the engine and transmission that attaches the 2 towthers. there are 2 bolts that hold the  bracket to the block and 2 that hold the bracket to the transmission. it's just above the oil filter.
Good luck :}