Pontiac Repair: hub bearing, pontiac grand prix gt 2000, pontiac grand prix

Question
i got a pontiac grand prix gt 2000. and i need to replace the hub bearing on the wheel. i see 3 screws on the back are those the one i need to take out is it easy. it looks like it thanks for helping

Answer
Hey Paul:
Yes it's a easy job remove the nut on the axle shaft the brake caliper and rotor then the bolts on the back side of the hub. You may need to use a hammer to get the hub out of the knuckle They have a tendency to really hang up inside the knuckle. when you put it all back together follow the directions in the box the torque of the axle nut is imperative If no instructions in the box I belive the torque is around 130 Ft. lbs. Good luck :)