Pontiac Repair: 1998 Sunfire 2.2L No spark, head gasket replacement, crank sensor

Question
Just compleated head gasket replacement and all other realavent gaskets, new battery, starter, water pump, thermostat. Engine turns over, but have no spark to any plugs. Have power to plate in back of coils, replaced both coils with new ones, same result. Checked wire lead connections at top of coils, the one on the right has power, but the bigger one on the left has no power using the test light. All insturments work in car, turns over great has fuel, but cant get any spark to the plugs.
Thanks for any help.   Chris

Answer
Hi
First check the F/P-INJ, or IGN fuses.
Repair if necessary. After that we'll REALLY need to know if your getting engine RPM from the crank sensor to the ICM and from ICM to PCM. The BEST way would be to have a scantool attached to vehicle, and see if you'r getting RPM.
Are the plugs new? Make sure they are not fouled... check for spark with a spark tester.
Do you have a DVOM (voltmeter)?
Please follow post back CLICK the PRIVATE box, I'll send along more diagnostics...
Pawl