Pontiac Repair: AC problem in a 95 pontiac bonneville, blower motor resistor, head screws

Question
I changed my compressor and condensor in my car but the ac still doesnt work. I have some cold air coming from the bottom vents but no blowing. The blower doesnt work and I changed it but still wont spin. Is it a relay problem? Fuse? please help i spend more than $600 in the ac and electrical system alone. The blower once didnt stop working so i disconnected it, did i cause this problem? It wont work when i reconnect it.  

Answer
Hi
I believe your problem MAY be the Blower Motor Resistor.
It is located under the hood, just to the passenger side of the Blower Motor. It is held in by (I think) 3 (three)
7mm head screws. It is rectangular in shape.
You can have you mechanic check and make sure power is getting into the resistor.
This is JUST advise from experience.
Hope it helps
Good Luck
Paul