Small Engines (Lawn Mowers, etc.): carb settings

Question
I have a Weed Eater blower model gbi22. What is the adjustment for the Mix and Idle screws on the carb? Thank you so much for taking my question, you folks have helped me in the past and I do appreciate it.

Answer
Visit Walbro's website:

http://www.walbro.com/tech-tips

I'd start at 1 and 1/4 turns out from a GENTLY seated position.  DO NOT over tighten or you will damage the needles and carburetor!!!

A very small screwdriver is all you need.  If you start to feel resistance STOP...you are close enough to start turning out.  Set the low or idle first and then the high.  You will have to repeat adjusting both needles to fine turn the carburetor.

Eric