QuestionMy Honda lawn mower wont stay in gear to cut grass. When you engage the right side lever to start cutting it wont stay in gear and the blades stop. Where is the adjustment for this ?
AnswerHello Paul:
>>Since this is a Honda, you can Use this Site Addy; http://www.honda-engines-eu.com/en/welcome.html and Select "Service Information" from the Drop Down Menu of the Service Tab. Now Select "Shop Manual". Now Select your Mower/Engine Model Range. Now Select your Specific Engine Model and then Download the Shop Manual. The Manual should have the Information you Require.
>>If Not, then Send me the Mower Model Numbers, Please. With these I can Locate the Correct Manual and Better Assist you.
>>Once you know your basic model (such as HR21, HR214, HRM215) found on the shroud, you need to know which model type you have. These are the model number suffixes like PDA, HXA, and SMA. If your model number tag doesn't give you a complete model number, Look on the front of the deck near the muffler. You should see a PX, PD, (push models) SD, SX, HX, TD (self-propelled models) or something similar. These tell about some of the features of the mower and are part of your model number. The A means that the mower was made for the American market. Since all of these models are for the American market, the final A is implied.
>>If you Hit a Snag or this Does Not Correct the Problem, I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. All Follow up Questions are Accepted at Any Time. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
