Small Engines (Lawn Mowers, etc.): Murray Push Mower, overhead valve engines, briggs stratton engine

Question
We have a Murray 22" push mower with a Briggs & Stratton engine.  The bracket on the stop engine lever came off along with the engine stop cable.  We can't figure out how to put it back on.  Hope that's enough info.  Thanks

Answer
Hello Nancy:

>>Sorry for the Delay. This Question was Located in the Question Pool and I can Only Answer Questions from the Question Pool when I am Not Answering Questions here or at the Other Site I Answer Questions at.
>>Send me the Model and Type or Spec Numbers Off the Engine, Please. With these I can Locate the Proper Manual and Better Assist you. The Model Numbers May be Stamped Into the Blower Housing (metal engine cover) Above the Spark Plug or the Muffler. Many horizontal shaft, overhead valve engines have these numbers stamped into the OHV rocker cover. However, on certain overhead valve powered generators, the equipment manufacturer installs a decorative chrome rocker cover OVER the Briggs cover. If your engine has a decorative cover, it may be necessary to remove it in order to locate the Model, Type, and Code. If this is a Briggs and Stratton  Engine, then you can Also Use this Site Addy; http://www.briggsandstratton.com/maint_repair/BS_modeltypecode.pdf for Assistance in Locating the Model, Type and Code Numbers of a Briggs and Stratton Engine.
>>Thanks.

Respectfully

John

>>PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Allowed at Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John