Small Engines (Lawn Mowers, etc.): Tecumseh linkage, question pool, older models

Question
I have a new tecumseh 6 h.p.spring loaded go kart engine.I cant even get help at lawnmower shops.Most of the 6 h.p. engines have
a Idle link or tang to hook your springs too.Mine does not.It has two holes at the bottom of the govenor side by side,one bigger than the other.Model# OH 195XA Spec# 71228J.Are there supposed to be solid links and etc.for this application.Also there is one hole at the bottom of the control assembly.2 lawnmower shops told me they were stumped.please help me.I have been at all of the tecumseh repair books.But it just shows the older models.I have a headache from this.I thankyou for listeningy

Answer
Hello James:

>>Sorry for the Delay. This Question was Located in the Question Pool and I can Only Answer Questions from the Question Pool when I am Not Answering Questions here or at the Other Site I Answer Questions at.
>>I Sent you an Answer Today as you had the Question in my Question List last Evening.
>>Thanks for Using All Experts.
>>Till Next Time. May All Your Mechanical Problems be SMALL ONES and as Always, May the All Mighty Bless You and Yours. Be Safe and Happy.


Best Wishes and Good Luck


Respectfully


jbridger (John)