QuestionI just picked up a John Deere 265 with a Kawasaki FC540V. The engine is destroyed internally and needs to be replaced. Talked to local JD dealer and they said IF they could get a short block it would be in excess of $2000.00. Can you tell me what my options would be to repower this unit. The tractor is in amazing shape.
Thanks in advance for your help,
Dave
AnswerHello Dave:
>>Sorry for the Delay, but I had a Family Emergency come up and it kept me away all day. I am Usually able to Answer Questions within 12 to 18 Hours.
>>I Like the JD Product Lines, but Not their Prices.
>>This Unit can be Powered by Any OEM Engine that has the Same Mounting Holes, Crankshaft Length, Diameter and Key Slot and HP.
>>A Slightly Higher HP (within 5 HP) can be Used, but Do Not Overpower the Unit. This will cause Damage to the Units Operating Components. Under Powering will also cause Problems.
>>Have you Compared Prices from these Site Addy; http://www.tulsaenginewarehouse.com/catalog/kawasaki/ ? A Complete Engine (ready to Mount) from here is Approximately $1200.00 to $1800.00.
>>If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
