Small Engines (Lawn Mowers, etc.): Kohler engine, oil filter removal, engine oil filter, husqvarna riding mower

Question
John,
I have a Kohler "Courage 20" engine in a Husqvarna riding mower and am trying to remove/replace the factory installed oil filter for the first time.  I've tried to remove the oil filter by turning the filter counterclockwise with a strap wrench.  It will not budge.  Is this the correct way to remove this filter?  If it is, what should I do to free it up?

Thanks,
Gary

Answer
Hello Gary:

>>From your Description it Sounds like the Filter was Tightened too Tight when it was Replaced last time.
>>You are Turning the Filter the Correct Direction to Loosen and Remove it.
>>The O-Ring Seal has Seized to the Engine Block.
>>You may end up Crushing the Oil Filter to get it to Loosen from the Engine Block.
>>You can View a Breakdown of the Engine at this Site Addy; http://www.kohlerplus.com/login.asp and Select Enter as Guest. Now Select the Thumbnail of the Engine Catalog you Wish to View.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John