Small Engines (Lawn Mowers, etc.): Wiring problem, devilbiss generator, solinoid

Question
I have a DeVilbiss generator powered by a 11H.P. B&S.  The B&S Model#, Type,Engine Code are, 256427, 1162-E1, 9911231A.  The model # for the generator is GBFE6010-1, The problem i have is in the Stop/run/start, switch that operates the engine.  When i bought it, i was told it needed a new battery. Put a new one in, and it did nothing. I replaced the solinoid, and the starter is still not engaging.  Ive tested the starter and it works fine, Then i removed the switch, it is a 6 prong rocker switch with a momentary start.  I believe the switch is the problem but not sure.  From the switch there is a yellow wire going to the engine, a blue wire going to the switch on solinoid, a green wire going to a ground (I think), and a red wire going to the hot side of silonoid, to bring power back to the switch.  I'm not sure where all the wires go, and cant seem to find a wiring diagram showing the back of the switch, and where the wires go to on the engine.  If you could help, i would take any advise you have for me.  If you have any questions for me feel free to email me back.  Thank you so much.

Mike

Answer
Hello Mike:

>>From your Description it Sounds like a Bad Safety Switch/Sensor or a Bad Switch.
>>The Yellow should go to a Switch/Sensor on the Engine.
>>The Blue should be Attached to the Small Lug on the Solenoid.
>>The Green Wire should be a Ground and.
>>The Red Wire is the Switch Power Wire.
>>Locate the Low Oil Sensor and Disconnect it. If the Switch Works, then the Switch is Bad.
>>I Located a Breakdown of this Unit, but it does Not Provide a Wiring Diagram for the Control Panel.
>>You can View a Breakdown of the Generator at this Site Addy; http://www.devilbissparts.com/devilbiss/generator/generators.html and Enter the Model Numbers in the Window Provided or Select your Model from the List at the Middle of the Page.
>>To View a Breakdown of the Engine;
>>You can View a Breakdown/IPL of the Engine at this Site Addy; http://www.briggsandstratton.com/maint_repair/manual_and_more/ and Enter the Model Numbers (XXXXXX) and the Type Numbers (XXXX-XX) in the Appropriate Boxes and Click GO. Then Select Download PDF.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John